Vaša košarica je trenutno prazna!
Prikazujemo 1–16 od 19 rezultata
-
Audac ALI20 MK2
140,00 €MSRP:171,00 €The ALI20 is Audio Line Isolator, designed to isolate audio devices from each other, in most cases it is used to avoid hum, caused by ground loops in audio systems. 1 : 1 Turns ratio. 600 Ohm : 600 Ohm. Line and Mic level. In- and Output phase matching. Ground lift switch. Balanced XLR in- and outputs. Solid aluminium housing. Passive solution
CIJENA NA UPIT
-
-
Audac APG20 MK2
1,00 €MSRP:2,00 €The APG20 is a receiver gateway, designed to be used in combination with the Wall Line Input (WLI) and Wall Microphone Input (WMI) flush mount wall input units. It converts the signal transmitted over UTP CAT5 cabling into signals corresponding Line and Microphone levels, and makes them available on RCA and XLR connectors (a stereo WLI signal is converted into a dual mono signal). Stereo Line output. Microphone output. RJ45 input connector. RS485 link to amplifier. Mic level 0 dB / -40 dB switch. 24 V DC power supply
CIJENA NA UPIT
-
Audac ARJ03P
1,00 €MSRP:2,00 €RJ45 Junction box. Bus termination jumper. 3 x RJ45 connector. Mini-Din Rail mount. Screw mount wings
CIJENA NA UPIT
-
Audac ATU44 MK2
1,00 €MSRP:2,00 €The ATU44 is a universal input adapter which can be used for a wide varity of connections and extensions. 100V, 70V, 50V, 33V and 8 Ohm speaker input. Line signal output. Galvanic isolated output
CIJENA NA UPIT
-
Audac BAE100
40,00 €MSRP:47,00 €BAE100 Bluetooth antenna extender kit, allows increasement of reception range for a Bluetooth (2.4 GHz) receiver when installed to a 19″ equipment rack or any other (shielded) enclosure. The kit includes a 7 dBi (279 mm) antenna with a higher gain and reception range compared to most standard antenna’s
-
Audac NIO204
1,00 €MSRP:2,00 €Network I/O mixing breakout box Dante™/AES67 – 4 x Line outputs
All-in-one mixing & sound processing
4 x 4 channels Dante™ & AES67
4 x Balanced Line outputs
Integrated Bluetooth receiver (Version 4.2)
Compatible with BAE100 extender kit for a higher gain and reception range
S-box™ modular multifunctional enclosureCIJENA NA UPIT
-
Audac NIO222
1,00 €MSRP:2,00 €Network I/O mixing breakout box Dante™/AES67 – 2 x Mic/Line inputs + 2 x Balanced Line outputs
All-in-one mixing & sound processing
4 x 4 channels Dante™ & AES67
2 x Mic/Line inputs
2 x Balanced Line outputs
Integrated Bluetooth receiver (Version 4.2)
Compatible with BAE100 extender kit for a higher gain and reception range
S-box™ modular multifunctional enclosureCIJENA NA UPIT
-
Audac NIO240
1,00 €MSRP:2,00 €Network I/O mixing breakout box Dante™/AES67 – 4 x Mic/Line inputs
All-in-one mixing & sound processing
4 x 4 channels Dante™ & AES67
4 x Mic/Line inputs
Compatible with BAE100 extender kit for a higher gain and reception range
Integrated Bluetooth receiver (Version 4.2)
S-box™ modular multifunctional enclosureCIJENA NA UPIT
-
Audac PSD124
85,00 €MSRP:102,00 €Power supply 12V DC / 4A – DIN rail. 12 V DC / 4 A. Universal AC input (100-240 V AC / 50-60 Hz). DIN rail mounting. DIN screw terminal connections. High efficiency and reliability. Power on indication. Protections: Overload, Over Voltage, Over Temperature and Short Circuit. CE approval
CIJENA NA UPIT
-
-
Audac Q2TR
390,00 €MSRP:525,00 €Q2TR is a line transformer unit, especially designed to be used in combination with the Q2 quad channel power amplifier.
-
-
-
Audac TRM224
1,00 €MSRP:2,00 €70/100V transformer module for VEXO112 & VEXO115
TRM series are 70/100V line transformers that can be optionally implemented in the passive variants of the VEXO series. Installation is done by removing the backplate of the VEXO series (passive variants only) and replacing it with a 70/100V backplate on which the module is integrated. Like this the high-performance loudspeaker is able to be implemented in 70/100V systems
CIJENA NA UPIT
-
Audac TRM248
1,00 €MSRP:2,00 €70/100V transformer module for VEXO112 & VEXO115
TRM series are 70/100V line transformers that can be optionally implemented in the passive variants of the VEXO series. Installation is done by removing the backplate of the VEXO series (passive variants only) and replacing it with a 70/100V backplate on which the module is integrated. Like this the high-performance loudspeaker is able to be implemented in 70/100V systems
CIJENA NA UPIT