Vaša košarica je trenutno prazna!
Prikazujemo 577–592 od 1188 rezultata
-

FBT HORIZON VHA 112 SND
3.200,00 €MSRP:3.878,00 €Bass-reflex amplified subwoofer
High-excursion 320mm (12”) custom B&C Woofer
Frequency response from 45Hz to 120Hz
1600Wrms class-D amplifier with switching mode power supply
Network interface TCP/IP – AES70 compatible
Ethercon RJ45 input and output for daisy-chain
Remote control by INFINITO System Management Suite
OLED DISPLAY and encoder with PUSH for easy onboard control
DANTE audio streaming 24bit 48-96KHz
Neutrik PowerCON IN and LINK power connectors
Cabinet in 12mm (0.5”) birch plywood with anti-scratch varnish. Handles with rubber inserts and rubber-coated sides to protect the cabinet from bumps and scratches.
Ideal for reinforcing and extending the low range of the VHA406ND line arrayhttps://www.youtube.com/watch?v=kzoNCwpGwJ4
-

FBT HORIZON VHA 118 SND
3.700,00 €MSRP:4.538,00 €Bass-reflex amplified subwoofer
460mm (18”) high excursion B&C woofer with 100mm (4”) coil
Frequency response from 30Hz to 100Hz
2500Wrms class D amplifier with switching power supply
Network interface TCP/IP – AES70 compatible
Ethercon RJ45 input and output for daisy-chain
Remote control by INFINITO System Management Suite
OLED DISPLAY and encoder with PUSH for easy onboard control
DANTE audio streaming 24bit 48-96KHz
Neutrik PowerCON IN and LINK power connectors
Box in 18mm (0.7”) birch plywood with anti-scratch varnishhttps://www.youtube.com/watch?v=kzoNCwpGwJ4
-

FBT HORIZON VHA 118.2 SA
3.300,00 €MSRP:3.988,00 €Bass-reflex amplified subwoofer
460mm (18″) high excursion woofer B&C with 100mm (4″) coil
Frequency response from 30Hz to 100Hz
2500Wrms class D amplifier with switching power supply
DSP processor with 6 presets, 6-step delay
Control panel with XLR input and stereo link, volume, presets, delay, phase 0°-180°, status led
Neutrik PowerCON TRUE1 IN and LINK power connectors
Box in 18mm (0.7”) birch plywood with anti-scratch varnish -

FBT HORIZON VHA 406 A
2.400,00 €MSRP:3.025,00 €VERTICAL HORIZONTAL ACTIVE LINE ARRAY VHA406A is made from birch plywood with a tough and tour-ready synthetic rubber surround, four 6.5-inch woofers plus a 1.4″ compression driver on a waveguide. 90 degrees x 20 degrees dispersion, Class-D amplifier delivers 600W for the LF section and 300W for the HF. Vertical or Horizontal configuration
https://www.youtube.com/watch?v=unI7kzerme4
-

FBT HORIZON VHA 406ND
3.300,00 €MSRP:4.015,00 €Bi-amplified 2-way line array
4 x 165mm (6.5 “) custom woofers with 38mm (1.5”) coil
Large format FBT waveguide with 90° (H) x 20° (V) dispersion
Frequency response from 65Hz to 20KHz
Class-D 800Wrms for LF and 400Wrms for HF amplifiers with switch mode power supply
Network interface TCP/IP – AES70 compatible
Ethercon RJ45 input and output for daisy-chain
Remote control by INFINITO System Management Suite
OLED DISPLAY and encoder with PUSH for easy onboard control
The front of the loudspeaker is covered with a powder coated perforated steel grille.https://www.youtube.com/watch?v=kzoNCwpGwJ4
-

FBT HORIZON VHA-S 406
280,00 €MSRP:358,00 €FBT HORIZON VHA-S 406 CLUSTER BRACKET WITH SPEAKER POLE
-

FBT J 12A
540,00 €MSRP:750,00 €FBT J 12A – Active Full Range Multifunctional Speaker Equipped with 12″ and 1″ loudspeakers Bi amped switched-mode power supply amplifier with 350 Watt LF + 100 Watt HF RMS Class D Frequency range: 50 – 20.000 Hz Dispersional pattern: 90° x 60° Integrated DSP with 4 switchable EQ presets
-

FBT J 15A
600,00 €MSRP:825,00 €FBT J 15A – Active Full Range Multifunctional Speaker Equipped with: 15″ and 1″ speakers Bi-amped switched-mode power supply amplifier with 350 W LF + 100 W HF RMS Class D 48 – 20000 Hz 90° x 60° Integrated DSP with 4 switchable EQ presets
-

FBT J 5A
290,00 €MSRP:363,00 €FBT J 5A – Active Full Range Multifunctional Speaker Equipped with 5″ and 1″ loudspeakers Bi amped switched-mode power supply amplifier with 80 Watt LF + 40 Watt HF RMS Class D Frequency range: 80 – 20.000 Hz Dispersional pattern: 90° x 90° Angled for monitor use
-

FBT J 8A
370,00 €MSRP:550,00 €FBT J 8A – Active Full Range Multifunctional Speaker Equipped with: 8″ and 1″ speakers Bi-amped Class-D Switching Power Amp Power: 200 Watt LF + 50 Watt HF RMS Frequency range: 60 – 20.000 Hz Dispersion: 90° x 60° Integrated DSP with 2 switchable EQ presets
-

FBT JMaxX 110A
550,00 €MSRP:750,00 €Processed 2-way active loudspeaker
Sturdy gas-injected polypropylene molded enclosure
10″ LF woofer / 2″ voice coil
1″ exit throat HF compression driver
DSP with 4 EQ presets2 x M10 suspension points, 1.38″ top-hat speaker stand socket, wall bracket mount flange plate
Stage monitor angling facility with 12°, 40°, 55° taperhttps://www.youtube.com/watch?v=bkwrI_Z1n88
-

FBT JMaxX 112A
600,00 €MSRP:825,00 €FBT JMaxX 112A – 2-Way Active Loudspeaker 700W + 200W – 131 dB SPL 2-way, bi-amplified bass reflex design cabinet 700W RMS LF, 200W RMS HF, Class D power amplifiers with switch mode power supply DSP with 4-EQ presets Control panel with: XLR IN and XLR LINK, Volume, EQ presets, HP filter, GND LFT switch 2 x M10 suspension points, 35 mm (1.3/8″) top-hat speaker stand socket, wall bracket mount flange plate
https://www.youtube.com/watch?v=bkwrI_Z1n88
-

FBT JMaxX 114A
670,00 €MSRP:900,00 €FBT JMaxX 114A – 2-Way Active Loudspeaker 700W + 200W – 132 dB SPL 2-way, bi-amplified bass reflex design cabinet 700W RMS LF, 200W RMS HF, Class D power amplifiers with switch mode power supply DSP with 4-EQ presets Control panel with: XLR IN and XLR LINK, Volume, EQ presets, HP filter, GND LFT switch 2 x M10 suspension points, 35 mm (1.3/8″) top-hat speaker stand socket, wall bracket mount flange plate
https://www.youtube.com/watch?v=bkwrI_Z1n88
-

FBT MDS1240
620,00 €MSRP:1.050,00 €FBT MDS1240 – Integrated amp – 240W – MP3 player via USB/SD /MMC card – digital tuner – 230V/115V Power: 240W Outputs: 100-70-25V Corrections: 100 Hz, 10 kHz Inputs: 3xXLR mic, RCA Mic 1 with priority Line output Dimensions: 430 x 88 x 270 mm Weight: 10.5 kg
-

FBT MITUS 112A
1.599,00 €MSRP:2.025,00 €FBT MITUS 112A – ACTIVE SPEAKER 600W + 300W RMS – 133 dB SPL 2-way, bi-amplified, bass-reflex design 320 mm (12″) B&C neodymium magnet woofer with 75 mm (3″) voice coil 25 mm (1″) exit B&C neodymium magnet HF driver with 44 mm (1.7″) voice coil with 80°H x 50°V rotatable horn Class D amplifiers, 600WRMS to the LF and 300WRMS to the HF, switch mode power supply Frequency response from 50Hz to 20kHz
https://www.youtube.com/watch?v=RU8GEPwN-hs
-

FBT MITUS 115A
1.899,00 €MSRP:2.338,00 €2-way, bi-amplified, bass-reflex design. 380 mm (15”) B&C neodymium magnet woofer with 75 mm (3”) voice coil. 25 mm (1”) exit B&C neodymium magnet HF driver with 44 mm (1.7’’) voice coil with 80°H x 50°V rotatable horn. Class D built-in amplifiers, 600WRMS to the LF and 300WRMS to the HF, switch mode power supply. Frequency response from 46Hz to 20KHz. DSP with 8 eq presets
https://www.youtube.com/watch?v=RU8GEPwN-hs
