Vaša košarica je trenutno prazna!
Prikazuje se svih 11 rezultata
-
Cordial CES 01
38,00 €MSRP:45,00 €Passive 1-channel DI box. Sensitivity 10:1. Frequency Response + / – 0.3 dB from 20 Hz to 20 kHz. -0.008% THD @ 1 kHz @ 18dBu
-
Cordial CES 02
95,00 €MSRP:110,00 €Passive 2-channel DI box. Features of Cordial CES 02: 2 channel. Stereo inputs. Loop-through. RCA and 6.3 mm jack
-
Cordial CIW1
50,00 €MSRP:58,00 €A DI box in a connector-a practical thing. Unbalanced signal sources such as electric bass, electric guitar, keyboards, effects devices are balanced by the CORDIAL CIW 1 and adapted to the input sensitivity of mixer inputs
-
LD Systems LDI02
70,00 €MSRP:87,00 €Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated), extremely low battery consumption. Battery: 9 V block (not included).
-
-
OMNITRONIC LH-068
35,00 €MSRP:40,00 €1-channel DI box, phantom powered, active Phantom-powered DI box 1 high-impedance signal input, 6.3 mm jack 1 low-impedance XLR output 1 instrument feed-through output, 6.3 mm jack
-
Palmer PAN01
75,00 €MSRP:90,00 €PAN01 Passive DI box. Jack input with paralell “THRU” output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals.
-
Palmer PAN02
85,00 €MSRP:122,00 €Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special “floating ground” circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm.
https://www.youtube.com/watch?v=SDkvJrVfDyg
-
Palmer PAN04
115,00 €MSRP:150,00 €DI Box passive PAN04 consists of a housing containing the equivalent of two PAN 01s, making it a dual channel passive DI box. This „stereo” configuration makes it ideally suited for use with certain keyboards and devices which have several outputs.ive DI box. Jack input with paralell „THRU” output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals
https://www.youtube.com/watch?v=vzG2H9ARmmI
-
Palmer PLI04
150,00 €MSRP:206,00 €PLI04 – Media DI Box 2-channel for PC and laptop With the new PRO MEDIA DI/ PLI04, Palmer introduces a DI-box, produced with the discerning needs of the computer-age media in mind. Using this uncomplicated method, personal computers and other consumer equipment with unbalanced outputs can be converted to balanced, in order to carry out, e.g., a presentation over a professional PA system. The PLI-04 accommodates all the common input types, TRS jacks accepting mono or stereo plugs, RCA phono sockets and a 3.5mm stereo jack input for use with the headphone output of a Laptop or similar device.
-
Power Dynamics PDX30
50,00 €MSRP:66,00 €PDX30 Stereo Direct Injection Box is a portable dual-channel stereo DI box that delivers superior connectivity and audio performance. Housed in a robust alloy case the PDX30 features XLR balanced outputs and 6.3mm linked inputs/outputs. A built-in ground-lift switch can help avoid noise from ground loops. The PDX30 supports 9V battery or 48V phantom-power operation and is suitable for active acoustic guitars, bass guitars, electric pianos, synthesizers, drum machines, samplers, DJ mixers, CD, DVD and Mp3 players