Vaša košarica je trenutno prazna!
Prikazujemo 241–256 od 404 rezultata
-
FBT STAGEMAXX 12MA
899,00 €MSRP:1.188,00 €FBT STAGEMAXX 12MA – PROCESSED ACTIVE REINFORCEMENT MONITOR 400W + 100W RMS – 130 dB SPL 2-way, bi-amplified, bass reflex design cabinet Coaxial custom FBT 12″ B&C speakers with 64 mm (2.5″) voice coil B&C 25 mm (1″) exit throat compression driver and 44 mm (1.7″) voice coil Bi-amp: high dynamic Class D amplifiers 400W+100W RMS to provide a pleasant sound even at loud volume High efficiency switch mode power supply Digital Signal Processor with 4 factory equalization presets
https://www.youtube.com/watch?v=NVBX_9PBUAI
-
FBT SUBLINE 112SA
950,00 €MSRP:1.325,00 €PROCESSED ACTIVE SUBWOOFER 700W RMS – 130/133DB SPL
Bass-reflex design with high SPL and punch
320mm (12”) high excursion magnet woofer with 75mm (3”) voice coil
Frequency response from 40Hz to 140Hz
New amplifier engineered and manufactured by FBT, 700W RMS LF in Class D
Digital Signal processor with 8 presets, 2 equalization with 2 LPF Crossover settings, cardioid configuration
Control panel with Stereo XLR in/outs, Volume, EQ presets, 8 steps Delay from 0.25m to 3.5m, Phase Reversal Switch 0°-180°, 3 status LED indicators
15 mm (0.59”) birch plywood scratch resistant enclosure with internal bracing
M20 (20mm) top mount speaker stand socket and two aluminum ergonomic FBT handleshttps://www.youtube.com/watch?v=2qZ7Sqk5urs
-
FBT SUBLINE 115SA
1.200,00 €MSRP:1.613,00 €FBT SUBLINE 115SA – PROCESSED ACTIVE SUBWOOFER 1200W RMS – 132/135 dB SPL Bass-reflex design with high SPL and punch 380 mm (15″) high excursion magnet woofer with 75 mm (3″) voice coil Frequency response from 40Hz to 140Hz New amplifier engineered and manufactured by FBT, 700W RMS LF in Class D Digital Signal processor with 8 presets, 2 equalization with 2 LPF Crossover settings, cardioid configuration
https://www.youtube.com/watch?v=2qZ7Sqk5urs
-
FBT SUBLINE 118SA
1.750,00 €MSRP:2.313,00 €FBT SUBLINE 118SA – PROCESSED ACTIVE SUBWOOFER 1200W RMS – 134/137 dB SPL Bass-reflex design subwoofer 460 mm (18″) high excursion woofer with 75 mm (3″) voice coil, custom made for FBT by B&C Frequency response from 33Hz – 100Hz 1200W RMS Class D power amplifier with switch mode power supply Digital Signal Processor with 6 presets, 4 equalization with 2 LPF Crossover Settings, 6 step digital delay line up to 3.5m
https://www.youtube.com/watch?v=2qZ7Sqk5urs
-
FBT VENTIS 110A
990,00 €MSRP:1.120,00 €2-way, bi-amplified, bass reflex design
Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF
Digital Signal Processor with graphic displayhttps://www.youtube.com/watch?v=F2IIGdSTjZg
-
FBT VENTIS 112A
1.100,00 €MSRP:1.538,00 €FBT VENTIS 112A – PROCESSED ACTIVE SPEAKER 700W +200W RMS – 133 dB SPL 2-way, bi-amplified, bass reflex design Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF Digital Signal Processor with graphic display 15 mm (0.59″) birch plywood scratch resistant enclosure and internal bracing High efficiency switch mode power supply Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
https://www.youtube.com/watch?v=F2IIGdSTjZg
-
FBT VENTIS 112MA
1.100,00 €MSRP:1.538,00 €12″ + 1″ Conical 700w + 200w With DSP Active Stage Monitor
Bi-amped
Speakers equipped: 12″ Woofer and 1″ tweeter
Performance: 700 W Class D (LF) and 200 W Class H (HF)
DSP with 6 presets and 2 freely configureable memory slots
Housing material: 15 mm birch plywood
Coverage pattern (nominal): 90° conical
Frequency range: 55 Hz – 20.000 Hz (-6 dB)
Max SPL: 133 dB
Inputs: XLR / Jack combined input and RCA (“Cinch” stereo)
Left output: XLR male
Dimensions: (W x H x D): 563 x 311 x 452 mm
Weight: 17.5 kg
Colour: Blackhttps://www.youtube.com/watch?v=F2IIGdSTjZg
-
FBT VENTIS 115A
1.200,00 €MSRP:1.675,00 €FBT VENTIS 115A – PROCESSED ACTIVE SPEAKER 700W +200W RMS – 133 dB SPL 2-way, bi-amplified, bass reflex design Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF Digital Signal Processor with graphic display 15 mm (0.59″) birch plywood scratch resistant enclosure and internal bracing High efficiency switch mode power supply
https://www.youtube.com/watch?v=F2IIGdSTjZg
-
FBT VENTIS 115MA
1.250,00 €MSRP:1.750,00 €15″ + 1″ Conical 700w + 200w With DSP Active Stage Monitor
Bi-amped
Speakers equipped: 15″ Woofer and 1″ tweeter
Performance: 700 W Class D (LF) and 200 W Class H (HF)
DSP with 6 presets and 2 freely configureable memory slots
Housing material: 15 mm birch plywood
Coverage pattern (nominal): 90° conical
Frequency range: 55 Hz – 20.000 Hz (-6 dB)
Max SPL: 133 dB
Inputs: XLR / Jack combined input and RCA (“Cinch” stereo)
Left output: XLR male
Dimensions: (W x H x D): 632 x 354 x 516 mm
Weight: 21.3 kg
Colour: Blackhttps://www.youtube.com/watch?v=F2IIGdSTjZg
-
FBT VERTUS CLA 118SA
1.650,00 €MSRP:2.275,00 €FBT VERTUS CLA 118SA – PROCESSED ACTIVE SUBWOOFER Active subwoofer in bass-reflex design 460mm (18″) B&C high excursion woofer with 75mm (3″) voice coil Frequency response from 33Hz to 100Hz 1200W RMS Class D power amplifier with swittching mode power supply Processor DSP with 8 presets, cardioid configuration, delay
-
FBT VERTUS CLA 206 A
1.299,00 €MSRP:1.775,00 €FBT VERTUS CLA 206 A – ACTIVE COLUMN LINE ARRAY – The active CLA406.2A is a Class-D 600W + 300W system delivering a maximum SPL of 133 dB courtesy of four 6.5” customer woofers and a 1.4” B&C HF compression driver with a 2.5” voice-coil. On-board DSP offers a choice of eight presets while the enclosure’s large-format waveguide delivers 100° (H) x 25° (V) dispersion. The CLA206A, meanwhile, incorporates the same waveguide but with only two 6.5″ woofers. The compact column can be used stand-alone or in clusters, or as an ideal complement for the CLA406.2A, forming an overall system with increased mid-high dispersion and consistent sound pressure uniformity in the listening area.
https://www.youtube.com/watch?v=ing1Hu-qM1I
-
FBT VERTUS CLA 208SA
950,00 €MSRP:1.313,00 €FBT VERTUS CLA 208SA – PROCESSED ACTIVE SUBWOOFER CLA 208SA is a 2 x 8″ active subwoofer in bass-reflex design and birch ply enclosure. The internal Class D amplifier delivers 600W and is matched with a switch mode power supply and a DSP processor with filtering functions, equalization and speaker protection. Created with the idea of extending the CLA608A’s low frequency performance in live applications, the CLA208SA serves as the base support for the CLA604A column speaker which can either be frontally mounted to the sub, as well as fixed upon the optional stand through the M20 socket on the upside of the sub. The CLA208SA subwoofers are modular as well, and they can be stacked to enlarge and increase the maximum SPL
-
FBT VERTUS CLA 406.2A
1.840,00 €MSRP:2.413,00 €FBT VERTUS CLA 406.2A – ACTIVE COLUMN LINE ARRAY The active CLA406.2A is a Class-D 600W + 300W system delivering a maximum SPL of 133 dB courtesy of four 6.5” customer woofers and a 1.4” B&C HF compression driver with a 2.5” voice-coil. On-board DSP offers a choice of eight presets while the enclosure’s large-format waveguide delivers 100° (H) x 25° (V) dispersion. The CLA206A, meanwhile, incorporates the same waveguide but with only two 6.5″ woofers. The compact column can be used stand-alone or in clusters, or as an ideal complement for the CLA406.2A, forming an overall system with increased mid-high dispersion and consistent sound pressure uniformity in the listening area.
https://www.youtube.com/watch?v=ing1Hu-qM1I
-
FBT VERTUS CLA 604A
1.050,00 €MSRP:1.438,00 €FBT VERTUS CLA 604A – COLUMN ACTIVE LINE ARRAY VERTUS CLA is a light and compact modular line array system created for both live and fixed installations, comprised by two products: CLA 604a: bi-amp two-way active column speakers 400 + 100W RMS CLA 208Sa: active subwoofer 600W RMS 2-way bi-amplified Line Array Column 6 x 4″ (100 mm) custom woofer with 1″ (25 mm) voice coil 4 x 1″ (25 mm) neodymium dome tweeter on waveguide 130Hz to 20KHz frequency response Class D 400Wrms amplifier for LF and 100Wrms for HF with switch mode power supply DSP processor with 4 available equalization presets
-
FBT VT-F 406.2
150,00 €MSRP:180,00 €Flying Bar Suitable for FBT CLA 406.2A and CLA206A Weight: 1.4 kg Colour: Black
-
FBT VT-J 406
340,00 €MSRP:400,00 €Joint bar for Vertus CLA 406A satellite speakers from FBT, black color. Pair two CLA 406 loudspeakers and master their diffusion by giving them the ideal angle